ESKİ DOĞU BLOKU ÜLKELERİNİN DEMİR ÇELİK ÜRÜNLERİNİN DÜNYA NORMU KARŞILAŞTIRMALARI
PRODUCED PRODUCTS
 
steel grade foreign enquivalent
USA
Germany
standard ASTM designation of steel grade standard DIN designation of steel grade
GOST 380-94 (DSTU 2651-94)
Ст.1кп - - - -
Ст. 1пс, 1сп - - - -
Ст. 2кп А568 М 1012 17100 USt 37-2
Ст. 2пс А568 М 1012 17100 RSt 37-2
Ст. 2сп А568 М - 17100 RRSt 37-2
Ст. 3кп А568 М 1017 17100 USt 37-2
Ст. 3пс А568 М 1017 17100 St 37-3
Ст. 3сп А568 М 1017 17100 St 37-3
Ст. 4сп А568 М 1023 17100 St 44-3
Ст. 5сп А568 М 1030 17100 St 50-2
Ст. 0 - - 17100 St 33
GOST 1050-88
08кп А568 М 1008 1614.1 St 24
08пс А568 М 1008 1614.1 St 24
10кп А568 М 1010 1614.1 St 22, St 23
10пс А568 М 1012 1614.1 St 22, St 23
10 А568 М 1010 17200 C10, Ck10
15кп А568 М 1015 - -
15пс А568 М 1015 - -
15 А568 М 1015 17200 C15, Ck15
20пс А568 М 1020 - -
20 А568 М 1023 17200 C20, Ck20
25 А568 М 1026 17200 C25, Ck25
45 A568 M 1045 17200 C45, Ck45
55 A568 M 1055 17200 C55, Ck55
GOST 9045-93
08кп А366 А366 1623.1 St 12
08пс А619 А619 1623.1 St 13
08Ю А620 А620 1623.1 St 14
The stated foreign steel grades are not fully analogous ones but refer to the corresponding GOST (DSTU) grades. They may differ in the concentration range of certain chemical elements.
   
steel grade dimensions within the limits, mm notes
Hot-rolled sheets of carbon quality and ordinary quality steels DSTU 2834-94 (GOST 16523-97)
08кп, пс; 10кп, пс 2.0-2.5x1000 - 1260x1800-4000  
15кп, пс; 20кп, пс 2.6-3.0x1000 - 1400x1800-5000  
10; 15; 20; 25 3.1-3.9x1000 - 1500x1800-6000  
Ст. 1кп, пс, сп; Ст. 2кп, пс,сп; Ст. 3кп, пс, сп; 45, 55 3.0-3.9x1000 - 1300x2000-3500  
Hot-rolled sheets of coils of carbon quality and ordinary quality steels DSTU 2834-94 (GOST 16523-97) TU U 14-4-426-98
08кп, пс; 10кп, пс; 15кп, пс; 20кп, пс; 10; 15; 20; 25; Ст. 1кп, пс, сп; Ст. 2кп, пс, сп; Ст. 3кп, пс, сп; 08Ю Coil weight of up to 8.0 t: 2.0-2.5x1000-1250; 2.6-3.0x1000-1400; 3.1-3.9x1000-1500 Weight of coil not less than 4.0 kg per 1 mm of strip width inside dia of 750 mm outside dia up to 1250 mm
08кп, пс; 10кп, пс; 15кп, пс; 20кп, пс; 10; 15; 20; 25; Ст. 1кп, пс, сп; Ст. 2кп, пс, сп; Ст. 3кп, пс, сп; 08Ю Coil weight of up to 16.0 t: 2.5x1000; 2.6-2.9x1000-1250; 3.0-3.9x1000-1400 Weight of coil not less than 8.0 kg per 1 mm of strip width inside dia of 750 mm outside dia up to 1600 mm
In conformity to requirements of DSTU 2834-94 (GOST 16523-97) rolled sheets are produced:

1. ordinary quality carbon steel, durability groups: ОК 300В, ОК 360В, ОК 370В;

2. quality carbon steel, durability groups: К 260, К 270, К 310, К 330, К 350, К 390, К 490.

 
Main technical characteristics of hot-rolled sheets DSTU 2834-94 (GOST 16523-97)
durability group tensile strength Н/mm²(kg/mm²) elongation ð4, %, not less than bending to parallelism of sides
(а - thickness of sample,
b - dia of mandrel) 		other requirements
К 260В 260-380 (27-39) 28 d=a Rolled products are produced of categories 1, 4 and 5; surface finish group III - IV
К 270 207-410 (28-42) 26 d=a Rolled products are produced of categories 1, 4 and 5; surface finish group III - IV
ОК 300В 300-480 (31-49) 23 d=a Rolled products are produced of categories 1, 4 and 5; surface finish group III - IV
К 310В 310-440 (32-45) 25 d=a Rolled products are produced of categories 1, 4 and 5; surface finish group III - IV
К 330В 330-460 (34-47) 24 d=a Rolled products are produced of categories 1, 4 and 5; surface finish group III - IV
К 350В 350-500 (36-51) 23 d=a Rolled products are produced of categories 1, 4 and 5; surface finish group III - IV
ОК 360 360-530 (37-54) 22 d=2a  
ОК 370 370-530 (38-54) 22 d=2a  
К 390 390-590 (40-60) 20 d=2a  
К 490 490-720 (50-73) 13    
 
steel grade dimensions within the limits, mm notes
Hot-rolled strip of quality and ordinary quality carbon steel in coils TU 14-15-305-93
Ст. 1, 2, 3кп, пс, сп; 08кп, пс; 10кп, пс; 15кп, пс; 20кп, пс; 10; 15; 20; 25 Thickness: 2.0-2.2, =>2.2-2.8, =>2.8-3.2, =>3.2-3.9;
Width: 30-600, 50-600, 62-600, 80-600 		Weight of coil not less than 4.0 kg per 1 mm of strip width. Coil inside dia of 750 and 550 mm
On agreement between the producer and the user the steel strips can be pickled and oiled as specified in the order.
Small-size rolled product TU U 14-4-404-97
Ordinary quality steel and quality structural carbon steel, low-alloy steel Sheet sizes to specifications  
Hot-rolled sheets of low-alloy structural steel GOST 17066-80
09Г2, 14Г2, 09Г2С, 12ГС, 16ГС 2.5- 2.9x1000 - 1250x1800-4000; 3.0-3.9x1000-1350x1800-5000  
 
Main technical characteristics of hot-rolled low-alloy structural steel sheets. (GOST 17066-80)
steel grade tensile strength H/mm² (kg/mm²) yield point H/mm² (kg/mm²) elongation ð4, %
not less than
09Г2 441 (45) 295 (30) 20
14Г2 461 (47) - 17
09Г2С 490 (50) 345 (35) 20
12ГС 461 (47) 315 (32) 22
16ГС 490 (50) 325 (33) 20
 
PRODUCED PRODUCTS   
 
steel grade dimensions within the limits, mm notes
Cold-rolled sheets of quality carbon and general-purpose ordinary quality steels DSTU 2834-94 (GOST 16523-97)
08кп, пс; 10кп, пс; 15кп, пс; 20кп, пс; 10, 15, 20, 25; Ст. 1, 2, 3кп, пс, сп Sheets: 0.5-0,65x1000x1400-2000; 0.7x1000-1250x1400-2500; 0.8-1.0x1000-1400x1400-3500; 1.2-2.0x1000-1500x1400-3800  
45 Sheets: 0.8-2.0х1000-1250х2000-2500  
08кп, пс; 10кп, пс; 15кп, пс; 20кп, пс; 10, 15, 20; Ст. 1, 2, 3кп, пс, сп Coils: 0.5-0.65x1000; 0.7-0.8х1000-1250; 0.9-1.2х1000-1400; 1.4-2.0х1000-1500 Weight of coils not less than 8.0 kg per 1 mm of strip width
Inside dia 760 mm
Outside dia of up to 1600 mm
Rolled products 0.5 to 0.65 mm thick are produced of steel grades 08kp, ps; 10kp, ps.
For deliveries of coils with trimmed edge the inside diameters of coils are 600 and 500 mm. On agreement between the user and the producer shipments of rolled products with alternative dimensions are possible.
 
durability group tensile strength H/sq.mm (kg/sq.mm) elongation ð4, %, not less than bending to parallelism of sides (a - sample thickness,
d - dia of mandrel) 		other requirements
<= 2.0 mm >= 2.0 mm <= 2.0 mm >= 2.0 mm
К 260 В 260 - 380 (27 - 39) 26 29 d=0 without liner d=a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
К 270 В 270 - 410 (28 - 42) 25 28 d=0 without liner d=a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
ОК 300 В 300 - 480 (31 - 49) 24 26 d=0 without liner d=a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
К 310 В 310 - 440 (32 - 45) 24 27 d=0 without liner d=a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
К 330 В 330 - 460 (34 - 47) 24 25 d=0 without liner d=a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
К 350 В 350 - 500 (36 - 51) 23 24 d=0 without liner d=a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
ОК 360 В 360 - 530 (37 - 54) 22 24 d=a d=2a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
ОК 370 В 370 - 530 (37 - 54) 22 24 d=a d=2a Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
К 390 В 390 - 590 (40 - 60) 20 21     Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
К 490 В 490 - 720 (50 - 73) 13 14 - - Categories of rolled stock produced are 1 to 6; II - III groups of surface finish, normal and deep drawing
 
steel grade dimensions within the limits, mm notes
Quality low-carbon rolled products for cold stamping GOST 9045-93
08кп, пс; 08Ю Sheets: 0.5-6.65х1000х2000; 0.7х1000-1250х2000-2500; 0.8-1.0х1000-1400х2000-3500; 1.2-2.0х1000-1500х2000-3800;
Coils: 0.5-0.65х1000; 0.7-0.8х1000-1250; 0.9-1.2х1000-1400; 1.4-2.0х1000-1500 		Coil weight to be not less than 8 kg per 1 mm of strip width
Inside dia of 760 mm
Outside dia of up to 1600 mm
On agreement between the user and the producer the sheets with alternative dimensions can be produced.
 
Main technical characteristics of cold-rolled steel sheets for cold stamping. GOST 9045-93.
stampability steel grade yield point H/sq.mm (kg/sq.mm) tensile strength H/sq.mm (kg/sq.mm) elongation ð4, % hardness category of rolled products
for thickness of rolled products HR15T HR30T HRB
below 0.7 mm from 0.7 to 1.5 mm incl. from 1.5 to 2.0 mm incl. for thickness of rolled products
from 0.5 to 0.8 mm incl. from 0.8 to 1.7 mm incl. from 1.7 to 2.0 mm incl.
not more than not less than not more than
ОСВ 08Ю 195 (20) 250-350 (26-36) 34 36 40 76 51 46 3, 4, 5
СВ 08Ю 205 (21) 250-380 (26-39) 32 34 38 78 53 48 1, 2, 3, 4, 5
ВГ 08кп, пс - 250 - 390 (26 - 40) 26 28 29 - - - 1, 2, 3
Rolled products of extra deep drawing
ВОСВ 08Ю 185 250-350 38 40 42 76 51 46 4, 5
Depending upon thickness of rolled products depth of spherical indentation conforms to GOST 9045-93
 
steel grade dimensions within the limits, mm notes
Quality carbon steel sheets TU 14-15-309-93
08кп, пс; 10кп, пс; 15кп, пс; 20кп, пс; 10, 15, 20, 25; 08Ю 1.5-2.0х10001250х2000-3000; 2.1-3.0х1000-2000х2000-3500; 3.1-3.9х1000-1450х2000-3500  
On agreement between the user and the producer the sheets with alternative dimensions can be produced.
Low-carbon cold-rolled sheets (steel grade 08 ps) for the manufacture of enamelled dishware TU 14-15-202-89
08пс 0.5-1.2х1000х1400-3000 Optional delivery in coils
Quality steel cold-rolled sheets in coils for the manufacture of electric welded tubes TU U 14-4-416-97
10, 20 1.0-2.0Х1000 Inside dia of 760 mm
Production of coils with alternative dimensions is possible on agreement between the user and the producer.
steel grade dimensions within the limits, mm notes
Small-size rolled products TU U 14-4-404-97
Ordinary quality steel, quality structural carbon and low alloy steels Sheet size conform to specifications  
 
 
 
steel grade fraction of total mass of element, %
C Mn Si S P Ni Cu Cr Al
not more than
GOST 380-94(DSTU 2651-94)
Ст.1кп,пс 0.06-0.12 0.25-0.50 0.05 0.05 0.04 0.3 0.3 0.3  
Ст.2кп,пс 0.09-0.15 0.25-0.50 0.05 0.05 0.04 0.3 0.3 0.3  
Ст.2сп 0.09-0.15 0.25-0.50 0.15-0.30 0.05 0.04 0.3 0.3 0.3  
Ст.3кп, пс 0.14-0.22 0.30-0.60 0.05 0.05 0.04 0.3 0.3 0.3  
Ст.3сп 0.14-0.22 0.40-0.65 0.15-0.30 0.05 0.04 0.3 0.3 0.3  
Ст.4сп 0.18-0.27 0.40-0.70 0.15-0.30 0.05 0.04 0.3 0.3 0.3  
Ст.5сп 0.28-0.37 0.50-0.80 0.15-0.30 0.05 0.04 0.3 0.3 0.3  
GOST 1050-88
08кп,пс 0.05-0.12 0.25-0.50 0.03 0.04 0.035 0.3 0.3 0.10  
10кп, пс 0.07-0.14 0.25-0.50 0.07 0.04 0.035 0.3 0.3 0.15  
10 0.07-0.14 0.35-0.65 0.17-0.37 0.04 0.035 0.3 0.3 0.15  
15пс 0.12-0.19 0.35-0.65 0.05 0.04 0.035 0.3 0.3 0.25  
15 0.12-0.19 0.35-0.65 0.17-0.37 0.04 0.035 0.3 0.3 0.25  
20пс 0.17-0.24 0.35-0.65 0.05 0.04 0.035 0.3 0.3 0.25  
20 0.17-0.24 0.35-0.65 0.17-0.37 0.04 0.035 0.3 0.3 0.25  
25 0.22-0.30 0.50-0.80 0.17-0.37 0.04 0.035 0.3 0.3 0.25  
45 0.42-0.50 0.50-0.80 0.17-0.37 0.04 0.035 0.3 0.3 0.25  
55 0.52-0.60 0.50-0.80 0.17-0.37 0.04 0.035 0.3 0.3 0.25  
GOST 9045-93
08кп н.б.0.10 н.б.0.40 0.03 0.030 0.025        
08пc н.б.0.09 н.б.0.45 0.04 0.030 0.025        
08Ю н.б.0.07 н.б.0.35 0.03 0.025 0.020       0.02-0.07
NOTE: In steel grade 08Ю fraction of total mass of aluminium should be within 0.02 to 0.07% and up to 0.07% in steel grade 08ps
Fraction of total mass of carbon in steel 08Ю should be up to 0.08% and up to 0.10% in steel 08ps provided the standard for mechanical properties is observed.
GOST 4041-71
08кп н.б.0.10 0.25-0.45 0.03 0.03 0.025 0.15 0.20 0.10  
08пс н.б.0.09 0.25-0.45 0.04 0.03 0.025 0.15 0.20 0.10  
08Ю н.б.0.10 0.25-0.45 0.03 0.03 0.025 0.15 0.20 0.10  
25пс 0.22-0.27 0.25-0.50 0.03 0.04 0.040 0.25 0.30 0.25  
GOST 19281-89
09Г2 н.б. 0.12 1.40-1.80 0.17-0.37 0.04 0.035 0.30 0.30 0.30  
09Г2Д н.б. 0.12 1.40-1.80 0.17-0.37 0.04 0.035 0.03 0.15-0.30 0.30  
09Г2С н.б. 0.12 1.30-1.70 0.50-0.80 0.04 0.035 0.30 0.30 0.30  
12ГС 0.09-0.15 0.80-1.20 0.50-0.80 0.04 0.035 0.30 0.30 0.30  
16ГС 0.12-0.18 0.90-1.20 0.40-0.70 0.04 0.035 0.30 0.30 0.30  
14Г2 0.12-0.18 1.20-1.60 0.17-0.37 0.04 0.035 0.30 0.30 0.30  
10XНДП н.б. 0.12 1.30-0.60 0.17-0.37 0.04 0.07-0.12 0.30-0.60 0.30-0.50 0.50-0.80  
GOST 14959-89
65Г 0.62-0.70 0.90-1.20 0.17-0.37 0.035 0.035 0.40 0.40 0.25  
 
PRODUCED PRODUCTS   
 
GOST steel grade dimensions within the limits, mm notes
GOST 7350-77 20X13 4.0-6.0x1000 - 1250x2000 - 3500 Hot-rolled
GOST 5582-75 20Х13 1.0-3.9х1000 - 1200х2000-3000 Cold-rolled
GOST 5582-75 30Х13 1.0-3.9х1000 - 1200х2000-3000 Cold-rolled
 
PRODUCED PRODUCTS   
 
GOST steel grade dimensions within the limits, mm notes
GOST 5582-75 08X18Т1 Sheets: 3.0-6.0x1000x2000-3000 Hold-rolled
TU 14-226-127-92 08X18Т1 Sheets: 3.0-3.9x1000-1250x2000-3500 Hold-rolled
TU 14-226-127-92 08X18Т1 Sheets: 0.8-2.0x900-1200x2000-3500 2.1-3.0x1000-2000x2000-3000 3.1-3.9x1000-1600x2000-3000 Cold-rolled
GOST 5582-75 08X13 Sheets: 0.8-2.0x1000-1200x2000-2500 Cold-rolled
GOST 7350-77   Sheets: 5.0-6.0x1000-1250x2000-3500 Hold-rolled
TU 14-1-4017-85 08X18Тч Sheets: 0.8-3.5x1000-1200x2000-3500 Cold-rolled
TU 14-15-322-93 04X17Т-ГР Sheets: 3.0-6.0x1000-1250x2000-3500 Hold-rolled
TU 14-1-4954-91 04X17Т-ГР Sheets: 0.8-2.0x1000x2000-3000 Cold-rolled
TU 14-1-4955-91 04X17Т-ГР Coils: 0.8-2.0x1000 Cold-rolled
TU 14-1-4741-89 08X18T1 Coils: 1.5x1050 Cold-rolled
TU U 14-4-438-98   Coils: 0.8-2.0x100-510 Cold-rolled

 

 
Rolled products of Ni stainless steel
GOST steel grade dimensions within the limits, mm notes
GOST 7350-77 08Х18Н10Т, 08Х18Н10, 12Х18Н10Т, 12Х18Н9, 17Х18Н9 Sheets: 4.0-6.0х1000-1250х2000-3500 Hold-rolled
GOST 5582-75   Sheets: 3.5-3.9х1000-1100х2000-3500 Hold-rolled
GOST 5582-75   Sheets: 3.0-3.4х1000х2000-3500 Hold-rolled
GOST 5582-75   Sheets: 2.1-3.9х1000-2000х2000-3000 Cold-rolled
GOST 5582-75   Sheets: 1.5-2.0х1000-1250х2000-3500 Cold-rolled
GOST 5582-75   Sheets: 0.7-2.0х900-1100х1400-3000 Cold-rolled
TU U 14-4-438-98 08Х18Н10Т, 12Х18Н10Т Coils: 3.0-3.9х1000 Hold-rolled
TU U 14-4-438-98 08Х18Н10Т Coils: 0.8-2.5х1000 Cold-rolled
 
Rolled products of Ni - free stainless steel
TU 14-226-132-92 10Х14АГ15(ДИ-13) Sheets: 3.0-6.0х1000х2000-5000 Hold-rolled
GOST 5582-75 10Х14АГ15(ДИ-13) Sheets: 0.8-2.0х900-1100x2000-3000 Cold-rolled
TU U 14-4-435-98 10Х13Г18ДУ(ДИ-16У) Sheets: 4.0х1000-1250х2000-5000 3.0-3.9x1000x2000-3500 Hold-rolled
TU U 14-4-435-98 10Х13Г18ДУ(ДИ-16У) Sheets: 15.0-2.0x1000-1250x2000-3000 0.8-2.0x1000-1100x2000-3000 Cold-rolled
TU 14-15-315-93 10Х13Г18ДУ(ДИ-16У) Coils: 0.8-2.0x1000 Cold-rolled
 
Mechanical properties of hot-rolled stainless steel plate. GOST 7350-77
steel grade tensile straength H/mm² (kgf/mm²) yield point Н/mm² (kgf/mm²) elongation, % other requirements
not less than
08Х18Н10Т 510 (52) 205 (21) 43 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
08Х18Н10 510 (52) 205 (21) 43 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
12Х18Н10Т 530 (54) 235 (24) 38 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
12Х18Н9 530 (54) 215 (22) 38 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
17Х18Н9 600 (60) 265 (27) 35 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
20Х13 =<750 (76) - - The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
10Х14АГ15 740 (75) 290 (30) 45 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
10Х13Г18ДУ 640 (65) 315 (32) 47 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
08Х18Т1 490 (50) - 25 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
08Х18Тч 470 (48) - 35 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
08Х13 650 (66) 250 (25) 15 The plates are supplied in heat-treated and pickled state, surface finish group M3b - M5b
 
Mechanical properties of hot-rolled and cold-rolled stainless steel sheets. GOST 5582-75
steel grade tensile straength H/mm² (kgf/mm²) yield point Н/mm² (kgf/mm²) elongation, % other requirements
not less than
08Х18Н10Т 54 - 37 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
08Х18Н10 52 - 45 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
12Х18Н10Т 54 21 40 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
12Х18Н9 55 - 38 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
17Х18Н9 60 - 35 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
08Х13 42 - 21 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
20Х13 50 - 20 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
30Х13 50 - 15 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
10Х14АГ15 75-96 30 45 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
10Х13Г18ДУ 68 35 48 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
04Х17Т-ГР 48 - 32 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
08Х18Т1 47 - 32 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
08Х18Тч 48 - 35 The sheets are supplied in heat-treated and pickled state. Surface finish: group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled sheets
 
PRODUCED PRODUCTS   
 
steel grade GOST
TU 		fraction total mass of elements, %
C Si Mn Cr Ni Ti Mo V Co S P
not more than
Martensitic steel
20Х13 GOST 7350-77 0.16-0.25 =<0.8 =<0.8 12.0-14.0           0.025 0.030
30Х13 GOST 5632-72 0.26-0.35 =<0.8 =<0.8             0.025 0.030
Ferritic steels
04Х17Т-ГР TU 14-1-4954-91 =<0.04 =<0.8 =<0.8 16.5-18.5   5C-0.6       0.025 0.035
08X18Tч TU 14-1-4017-85 =<0.08 =<0.6 =<0.8 17.0-19.0   0.4-0.6     =<0.05 0.025 0.035
08X18T1 GOST 5632-72 =<0.08 =<0.8 =<0.7 17.0-19.0   0.6-1.0       0.025 0.035
08X13 GOST 5582-75 =<0.08 =<0.8 =<0.8 12.0-14.0           0.025 0.030
Austenitic steels
08X18H10 GOST 5632-72 =< 0.08 =<0.8 =<2.0 17.0-19.0 9.0-11.0         0.020 0.035
08X18H10T GOST 5632-72 =<0.08 =<0.8 =<2.0 17.0-19.0 9.0-11.0 5C-0.7       0.020 0.035
08X18H12T GOST 5632-72 =<0.08 =<0.8 =<2.0 17.0-19.0 11.0-13.0 5C-0.6       0.020 0.035
12X18H10T GOST 5632-72 =<0.12 =<0.8 =<2.0 17.0-19.0 9.0-11.0 5C-0.6       0.020 0.035
12X18H9 GOST 5632-72 =<0.12 =<0.8 =<2.0 17.0-19.0 8.0-10.0         0.020 0.035
17X18H9 GOST 5632-72 0.13-0.21 =<0.8 =<2.0 17.0-19.0 8.0-10.0         0.020 0.035
10Х13Г18ДU TU U 14-4-435-98 0.08-0.12 =<0.7 17.0-18.5 12.5-14.0 =<2.0         0.030 0.045
10X14АГ15 GOST 5632-72 =<0.10 =<0.8 14.5-16.5 13.0-15.0           0.030 0.045
10X17H13M2T GOST 5632-72 =<0.10 =<0.8 =<2.0 16.0-18.0 12.0-14.0 5C-0.7 2.0-3.0     0.020 0.035
10X17H13M3T GOST 5632-72 =<0.10 =<0.8 =<2.0 16.0-18.0 12.0-14.0 5C-0.7 3.0-4.0     0.020 0.035
20X23H18 GOST 5632-72 =<0.20 =<1.0 =<2.0 22.0-25.0 17.0-20.0         0.020 0.035
Alloy steels
25XГСА GOST 4543-71 0.22-0.28 0.9-1.2 0.8-1.1 0.8-1.1           0.035 0.035
30ХГСА GOST 4543-71 0.28-0.34 0.9-1.2 0.8-1.1 0.8-1.1           0.035 0.035
12Х2НМФА GOST 11268-76 0.09-0.16 0.17-0.37 0.3-0.7 1.9-2.4 0.8-1.2   0.35-0.45 0.18-0.28   0.025 0.025
19Х2НМФА GOST 11268-76 0.16-0.23 0.17-0.37 0.3-0.7 1.9-2.4 0.8-1.2   0.35-0.45 0.18-0.28   0.025 0.025
21Х2НМФА GOST 11268-76 0.16-0.23 0.17-0.37 0.3-0.7 1.9-2.4 0.8-1.2   0.35-0.45 0.18-0.28   0.025 0.025
7ХНМФБ TU 14-19-145-94 0.68-0.78 0.15-0.35 0.3-0.6 0.4-0.7 0.3-0.5   0.15-0.30 0.15-0.30 =<0.30 0.010 0.015
5H1A TU14-19-145-94 0.46-0.54 0.17-0.37 0.5-0.8 =<0.3 1.4-1.7       =<0.30 0.010 0.015
 
 
GOST steel grade dimenshions within the limits, mm notes
Alloy structural steel sheets
GOST 11268-76 25ХГСА, 30ХГСА и and other alloy steel grades 3.5-3.9х1000-1100х2000-5000, 3.0-3.9х1000х2000-5000 Hold-rolled, Hold-rolled
GOST 11268-76 25ХГСА, 30ХГСА и and other alloy steel grades 2.103.9х1000-2000х2000-3000, 1.5-2.0х1000-1250х2000-3000 Cold-rolled, Cold-rolled
GOST 11269-76 25ХГСА, 30ХГСА и and other alloy steel grades 4.0-6.0х1000-1250х2000-5000, 4.0-5.0х1500-2000х до 2750 Hold-rolled, Cold-rolled
Cold-rolled alloy structural steel products of steel grade 65Г
TU 14-15-330-94 65Г 0.8-2.0х1000-1250х2000-2500, 1.5-3.9х1000-1500х2000-3000 Cold-rolled, Cold-rolled
GOST 1577-81 65Г 3.0-3.9х1000-1250х2000-3500, 4.0-6.0х1...-1250х2000-3500 Hold-rolled, Hold-rolled
Alloy tool steel sheets
TU 14-19-145-94 7ХНМФБ, 5Н1А 3.0-6.0х1000-1100х2000-3000, 2.5-3.9х1000-1100х2000-3000 Hold-rolled, Cold-rolled
Small-size rolled products
TU У 14-4-404-97 Alloy stainless structural steel Sheet size to conform to specifications  
 
Mechanical properties of hot-rolled and cold-rolled alloy steel products GOST 7350-77
steel grade tensile strength H/sq.mm (kgf/sq.mm) yield point Н/sq.mm (kgf/sq.mm) elongation, % othe riquirements
not less than
25ХГСА 1080 (110) - 10 Mechanical properties of heat-treated samples
30ХГСА 1080 (110) - 10 Mechanical properties of heat-treated samples
65Г 590-880 (60-90) - 10 Mechanical properties of heat-treated samples
7ХНМФБ 745 (75) 470 (48) 20 Mechanical properties of heat-treated samples
5Н1А 745 (75) 470 (48) 20 Mechanical properties of heat-treated samples
 
steel grade dimensions within the limits, mm
Ni stainless steel sheets TU U 14-4-436-98
12Х18Н10Т 3.003.9х1000 х2000-5000, 4.0-4.6х1000-1250х2000-5000, 5.0-6.0х1000-1310х2000-5690
Ni-free stainless steel sheets TU U 14-4-436-98
10Х14АГ15 (ДИ - 13) 3.0-3.9х1000; 1100х2000-5000, 4.0-6.0х1000; 1100х2000-5000
The sheets with special surface finish with respect to standardization of roughness value are produced at the Works in compliance with requirements of GOST 2789-73 to yield in of the following numbers:
-N 2.5, -N 1.25, -N 0.63, -N 0.32, -N 0.16, -N 0.08, -N 0.04 without standardizing the roughness.

Quality of surface finish and standardized value of roughness should be specified in the order.
Field of application:   hard-worked and half hard-worked steel sheets are used as liners in pressing the laminated plastic materials and papers laminates;   as heat-treated for the manufacture of industrial equipment, household appliances and other applications.


PRODUCED PRODUCTS   
 
steel grade dimensions within the limits, mm
Ni stainless steel sheets TU U 14-4-436-98
12X18H10T 0.8-1.3x1000 x1500-2600, 1.4-1.8x1000 x2000-3000, 1.5-2.0x1000; 1100x1500-2600, 2.0x1000-1250x2000-3000; 2.2-3.2x1000; 1100x2000-3000; 3.5x5.0x1250 x2000-3000
12X18H10T-Ш, 17Х18Н9 1.5-2.0х1000; 1100х1500-2600; 1.5-2.0х1000 х1500-2200
Ni-free stainless steel sheets TU U 14-4-436-98
10Х14АГ15 (ДИ - 13), 10Х14АГ15 - Ш 0.8-1.4х1000; 1100х1500-2600, 1.5-2.0х1000; 1100х1500-2600
The sheets with special surface finish with respect to standardization of roughness value are produced at the Works in compliance with requirements of GOST 2789-73 to yield in of the following numbers:
-N 2.5, -N 1.25, -N 0.63, -N 0.32, -N 0.16, -N 0.08, -N 0.04 without standardizing the roughness. Quality of surface finish and standardized value of roughness should be specified in the order.
Field of application:

·   hard-worked and half hard-worked steel sheets are used as liners in pressing the laminated plastic materials and papers laminates;

·   as heat-treated for the manufacture of industrial equipment, household appliances and other applications.